RFID inlays and tags for Bangladesh's apparel supply chain
We source UHF and NFC RFID inlays, hang tags and labels from established international manufacturers for Bangladesh's label converters and garment factories — matched to specification, imported through standard BTB LC, supported locally.
RFID has moved from optional to expected
Item-level RFID in apparel was once something global retailers piloted. It is now standard across much of the sector, because the numbers hold up — stock accuracy improves sharply, shipment errors fall, and the labour spent counting disappears.
For Bangladeshi manufacturers the requirement usually arrives from the buyer: a nominated inlay specification, a tagging requirement for a programme, or carton-level verification at dispatch. The factory or its converter then has to source against that specification.
Greenwell exists in that gap, bringing international inlay supply within reach at the specification the buyer actually asked for.
What RFID delivers in the factory
- Work-in-progress visibility across production
- Carton verification against packing lists in seconds
- Fewer short-ships and mis-picks reaching the buyer
- Faster, evidence-based buyer audits
- Accurate stock without manual counting
- Item-level data when a brand requires it
Inlays and tags for apparel, garments and fashion
Read range, substrate, wash durability and frequency all shift depending on where the tag lives and what it has to survive. We source across the range rather than pushing one format.
UHF inlays — dry & wet
The workhorse of apparel RFID at 860–960 MHz, to EPC Gen2 / ISO 18000-63. Dry inlays for converters laminating their own labels, wet inlays with adhesive for direct application. Long range and bulk reading for stock, WIP and logistics.
Hang tag inlays
Paper-face inlays sized for printing and conversion into brand hang tags — the most common item-level format in RMG, compatible with the printers and encoders converters already run.
Care label & heat-seal
Built to stay with the garment through wear and washing. Heat-seal and sew-in formats survive laundering, which matters for resale, rental, repair and take-back programmes.
NFC inlays
HF 13.56 MHz to ISO 14443 and NFC Forum standards, readable by any smartphone without an app — the natural carrier for consumer engagement, authentication and digital product passport access.
Dual-frequency inlays
UHF and NFC on one inlay — supply chain reading and consumer tap from a single tag, avoiding the cost and application overhead of tagging twice.
Specialist formats
Carton and pallet labels for dispatch verification, on-metal constructions for footwear and accessories with metal fittings, tamper-evident and authentication inlays, and sealed tags rated for industrial laundry cycles.
Where a buyer nominates a specific inlay or chip, we source to it exactly. Where you are specifying for the first time, we help match format to application before volume is committed — the wrong inlay in the right tag is an expensive way to learn about read rates.
The pressure is arriving from three directions at once
Traceability is no longer a sustainability conversation. It is becoming a condition of holding orders — and the timeline that matters to a Bangladeshi factory is the buyer's, not the regulator's.
1. Regulation
The EU's Ecodesign for Sustainable Products Regulation (EU) 2024/1781 introduces the Digital Product Passport — a verified digital record reached through a data carrier such as a QR code, NFC or RFID tag, covering fibre composition, country of origin, chemical safety, care, repairability and recyclability.
Critically, it applies to any brand selling into the EU regardless of where the garment was made. A label producing in Bangladesh and selling in Germany carries the same obligation as one producing in Portugal.
2. Buyers
Retailers and brands are expected to fold DPP data into supplier onboarding and contract renewal — which turns a compliance question into a commercial one. Suppliers unable to provide verifiable product data risk failing audits, losing listings and dropping out of long-term sourcing programmes.
This is the deadline that bites first. Buyer requirements typically land one to two years ahead of the legal date, and they arrive as a condition of the next order rather than a consultation.
3. The sector is already moving
In May 2026 BGMEA signed a memorandum of understanding with Dutch traceability platform AWARE to enable end-to-end traceability of fibres, yarns and garments through blockchain-backed records, positioning Bangladeshi exporters ahead of the EU rules.
Industry guidance suggests brands and their tier 1–3 suppliers need roughly two years to become DPP-ready. Factories that begin in 2026 or 2027 will be qualified suppliers when buyers start asking; those that wait will be answering questionnaires under pressure.
What is actually required — and what is not
There is a great deal of confident misinformation circulating on this subject. Three points are worth getting right before anyone spends money.
NFC is RFID. The permitted carriers include printed QR codes and NFC tags. NFC is not an alternative to RFID — it is RFID, operating at 13.56 MHz. An NFC carrier is an inlay embedded in a hang tag or label. A brand selecting NFC for passport access has already selected RFID.
Batch, not item. The minimum data granularity specified for textiles is the production batch, not the individual garment. Item-level tracking remains voluntary under the regulation. Its value comes from buyer demand and operational return — not from a legal mandate. Anyone telling you item-level RFID is legally compulsory is overselling.
Dates are still moving. Published timelines differ between sources and have already shifted once. Current industry expectation places the textile delegated act around late 2027 to 2028, with compliance obligations following roughly 18 months later. Treat any specific date as provisional and plan against buyer requirements instead.
What this means practically
You do not need to solve DPP compliance today. You need to be capable of item-level identification when a buyer asks — and to have validated read rates on your own product before that conversation, not during it.
That capability starts with the right inlay in the right tag, tested on your actual garments and packaging. Sample validation costs very little and settles most of the questions that otherwise stall a programme for months.
From specification to delivered inlay
A process built around the way RMG procurement actually runs.
Specification
Send the buyer's nominated specification, or describe the application and we identify the right inlay format and chip.
Samples
Samples supplied for read-rate testing on your own product and packaging before volume is committed.
Order & import
Terms agreed, order placed with the manufacturer, imported through standard BTB LC arrangements.
Delivery & support
Delivery coordinated locally, with someone in-country to call if performance or supply issues arise.
Common questions on RFID in Bangladesh
What is the difference between an inlay, a tag and a label?
The inlay is the working component — a chip attached to a printed antenna on a thin substrate. A converter laminates that inlay into paper or fabric to produce a finished hang tag, care label or carton label. When a buyer nominates a chip or inlay specification, they are specifying the component; the finished tag is produced locally around it.
What is the difference between UHF RFID and NFC?
Both are RFID, differing in frequency and purpose. UHF operates at 860–960 MHz with metres of range and reads hundreds of tags at once — suited to stock counting, WIP and shipment verification. NFC operates at 13.56 MHz with centimetres of range and is readable by any smartphone, making it the practical choice for consumer authentication and product passports. Dual-frequency inlays carry both.
Can you supply against a specification our buyer has nominated?
Yes — that is the most common request. Send the specification including chip type, inlay dimensions, substrate and any performance requirement, and we source to it. Where a nominated part is unavailable or carries a long lead time, we identify equivalents and let you confirm them with the buyer rather than substituting silently.
How are payment and import handled?
Inlays are imported through standard back-to-back LC arrangements, the same mechanism used across the RMG trim and accessories supply chain. Commercial terms are set against specification and volume, and confirmed before the order is placed.
Send us your specification
Whether it is a buyer nomination you need sourced, or a first evaluation of RFID for your operation, start with the specification or the application.